Efficient power conversion with four switch soft-switching boost integrated half-bridge dual-output series resonant converter

Abstract

Listen

Translate article

Soft switching reduces voltage and current stress during transitions, smoothing and quieting operations and reducing electromagnetic interference while also increasing efficiency and equipment lifespan. Circuit design, component selection, and switching frequency optimization affect power electronics soft switching. This paper proposes boost integrated half-bridge dual-output series resonant (BIHBDOSR) converter, a novel converter design and control method to increase series resonant converter performance by reducing storage element size, switch count, and switching losses. This methodology relies on soft-switching technologies like zero-voltage switching (ZVS) and zero-current switching (ZCS). These methods use class-D, class-E, series, parallel, and series–parallel resonant converter circuits to increase efficiency and minimize component stress. The proposed converter is ideal for constant voltage, constant power, and current-controlled loads with the output voltage being regulated by a closed-loop PI controller. The output voltages for two loads in the simulation depart from reference values. V01 changes from 14 to 20 V and V02 from 18 to 15 V at 300 ms owing to switching variances. The proposed converter utilizes gate driver circuits, resonant tank circuit, current sensor, FPGA board for closed-loop control, and current sensor for stability, ensuring converter stability. The proposed converter closed-loop control method modifies PWM signals to regulate both loads independently and ensure steady output voltage. Additionally, to validate the effectiveness of proposed converter, a 50-W driver circuit is designed, delivering two independent outputs of 20 W and 30 W. Frequency modulation (FM) and duty cycle control methods are employed to obtain the desired outputs.