Efficient nitrogen removal through coupling biochar with zero-valent iron by different packing modes in bioretention system

Abstract

Three kinds of bioretention were designed to explore the effects of zero-valent iron (ZVI) and biochar on the nitrogen removal performance and to seek a more reasonable packing method in this study. The results showed that the effluent removal rates of nitrate, ammonium and total nitrogen were 53.30 ± 12.68%, 98.41 ± 0.38% and 64.03 ± 8.72% respectively in Bioretention-3 during the rainfall events, while the nitrate concentration decreased gradually with the increase of drying time. According to the batch experiment, it was found that zero-valent iron could release continuously and stably in Bioretention-3 and Bioretention-1 due to the interception effect of biochar on dissolved oxygen. In addition, biochar in soil layer could protect zero-valent iron from excessive oxidation while biochar in the substrate layer could release organic matter to promote heterotrophic denitrification. Microbial community analysis showed that the dominant phyla were Proteobacteria (20.92–40.81%) and Actinobacteriota (9.89–24.54%). The dominant nitrifying genera was Nitrospira while there were also aerobic denitrifying bacteria (Sphingomonas, Bradyrhizobium and Chryseolinea, etc.) in soil layer. In the substrate layer, there was more ferrous iron-mediated autotrophic denitrification process (Thiobacillus, Geobacter and Denitratisoma, etc.) in Bioretention-1 and Bioretention-3 while a larger proportion of Dissimilatory Nitrate Reduction to Ammonium process (DNRA) (Bacillus, Desulfovibrio and Pseudomonas, etc.) in Bioretention-2. In general, this study showed that biochar addition in soil coupled with mixing zero-valent iron and biochar as substrate layer was a more stable and efficient design through various aspects of evidence. It provides a new way for how to use zero-valent iron and biochar to improve nitrogen removal capacity in stormwater management.