Efficient Micrometer Thick Bifacial Perovskite Solar Cells

Abstract

AbstractPerovskite solar cells have become promising candidates for thin‐film photovoltaics (PV), but many record cells suffer from losses in current (≈3–4 mA cm−2). This is due to the choice of superstrate configurations (i.e., glass‐side illumination) and thin absorber layers, typically on the order of ≈500 nm. Illumination through a top transparent conductive oxide electrode (substrate configuration) using LiF and Al2Ox as anti‐reflective coatings leads to reflectance losses below 1% is demonstrated. When combined with 1 µm thick absorber layers, substrate configurated bifacial devices have power conversion efficiencies >20%, with minimized reflection losses approaching 98% of their detailed‐balance limits and higher Jsc than their monofacial counterparts. Further analysis is conducted to show there is still a significant fraction of current lost due to poor charge‐carrier extraction (e.g., resistive or low mobility contacts). This is studied by a direct comparison of photoluminescence at short‐circuit versus open‐circuit estimating a 4.5% loss in charge‐carrier collection.