Efficient method for whole-breast irradiation therapy using Halcyon linear accelerators.

Abstract

BackgroundThe Halcyon is a linear accelerator‐based treatment machine designed for a high‐throughput simplified workflow. The machine features a compact jawless design, dual‐layer multileaf collimators, and a single 6‐MV flattening filter‐free (FFF) beam. However, the machine's 6‐MV FFF beam may restrict its applicability to conventional techniques, such as field‐in‐field (FiF) radiotherapy, for breast cancer treatment. This study developed a practical and efficient hybrid method for imaging, planning, and irradiation procedures for whole‐breast irradiation using Halcyon linear accelerators.Materials and methodsThe proposed method involves five major steps: (1) field arrangement, (2) planning target volume (PTV) generation and evaluation, (3) basal plan generation, (4) inverse planning intensity–modulated radiation therapy plan generation, and (5) plan evaluation and irradiation. The PTV is generated using isodose curves plotted on the basis of tangential fields, which are applied to create a basal plan. Subsequently, a basal‐dose‐compensation approach is applied to further optimize the treatment plan. This efficient workflow necessitates executing only one onboard cone‐beam computed tomography procedure. This study included 10 patients with early‐stage breast cancer who were treated at our center. The performance of the proposed method was evaluated by comparing its corresponding irradiation time and dose statistics with those derived for a dynamically flattened beam‐based FiF (DFB‐FiF) method.ResultsAll plans were normalized to ensure that 98% of the prescribed dose covered 95% of the PTV. On average, the global maximum doses in the proposed and DFB‐FiF methods were lower than 106%. The homogeneity index for right‐sided (left‐sided) breast cancer was 0.053 (0.056) in the proposed method and 0.073 (0.076) in the DFB‐FiF method. The dose statistics of normal tissues, including the contralateral breast, heart, and lungs, were comparable between the methods. However, the irradiation time per monitor unit in the proposed method was approximately five times faster than that in the DFB‐FiF method, but the planning time and complexity were similar between the methods.ConclusionsThis study developed and evaluated an efficient and practical hybrid method for whole‐breast irradiation using the Halcyon. This method can significantly reduce the irradiation time, while providing comparable dose statistics to the DFB‐FiF method.