Abstract
This paper presents a VLSI architecture of QR decomposition for 4×4 MIMO-OFDM systems. A real-value decomposed MIMO system model is handled and thus the channel matrix to be processed is extended to the size of 8×8. Instead of direct factorization, a QR decomposition scheme by cascading one complex-value and one real-value Givens rotation stages is proposed, which can save 44% hardware complexity. Besides, the requirement of skewed inputs in the conventional QR-decomposition systolic array is eliminated and 36% of delay elements are removed. The real-value Givens rotation stage is also constructed in a form of a stacked triangular systolic array to match with the throughput of the complex-value one. Hardware sharing is considered to enhance the utilization. The proposed design is implemented in 0.18-μm CMOS technology with 152K gates. From measurement, the maximum operating frequency is 100 MHz. It generates QR decomposition results every four clock cycles and accomplishes continuous projection every clock cycle to support MIMO detection up to 2.4 Gb/s. The measured power consumption is 318.6 mW and 219.6 mW for QR decomposition and projection, respectively, at the highest operating frequency. From the comparison, our proposed design achieves the highest throughput with high efficiency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have