Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared via Low-Temperature in Situ Dynamic Thermal Crystallization.

Abstract

The present study systematically investigates the morphology and crystallization process of inorganic CsPbBr3 perovskite layer films fabricated by thermal coevaporation in conjunction with continuous low-temperature thermal annealing to promote in situ dynamic thermal crystallization. The results confirm for the first time that both the crystal grain size and the compactness of the CsPbBr3 films can be tuned during the thermal coevaporation fabrication process via in situ dynamic thermal crystallization. The performance of the PeLEDs employing the CsPbBr3 films as the emitter layer is investigated in detail with respect to the substrate temperature and deposition rate employed during deposition of the CsPbBr3 film. This study provides guidelines for developing suitable film production processes and highlights future challenges that must be addressed to facilitate the commercial development of large-area, uniform, and flexible perovskite-based optoelectronic devices.