Efficient fiber-inspection and certification method for optical-circuit-switched datacenter networks

Abstract

Datacenter networks (DCNs) consisting of optical circuit switches (OCSs) have been considered as a promising solution to dramatically improve their transmission capacity, energy efficiency, and communication latency. To scale optical-circuit-switched DCNs (OCS DCNs), hierarchical OCSs with tens of thousands of optical fibers need to be installed, and they should be inspected before starting datacenter operations. Since traditional DCNs consist of electrical-packet switches (EPSs), the condition and cabling of fibers can be inspected easily by probing neighboring EPSs. However, OCS networks cannot be inspected in the same manner because OCSs cannot transmit and receive probe signals. Thus, we have had to attach and detach a light source and power meter (LSPM) to every switch for probing all the fibers, which takes weeks. This paper proposes an efficient method for inspecting and certifying fibers in an entire DCN without repeating LSPM reattachment. Our method is based on (1) theories on quickly estimating the fiber condition on the basis of the intensity of received probe signals, (2) the maximum allowable loss of each fiber derived from the transceiver budget used in operations, and (3) an algorithm that reduces the number of probes needed. The results from an extensive numerical evaluation indicate that our method inspected a DCN with 18,432 fibers in at most a day, whereas a baseline method involving repeated LSPM reattachment would take more than a week. We also confirmed that our method never produced false negatives and false positives under practical network conditions.