Abstract
A composite-EDFA configuration which incorporates an optical isolator has been investigated theoretically and experimentally. The isolator prevents the build-up of the backward-ASE and results in an amplifier with high gain and near-quantum-limited noise figure (NF). The optimum position of the isolator has been calculated as a function of the pump power so that minimum NF and maximum gain are achieved simultaneously. It is shown that under practical pump powers, the optimized composite EDFA exhibits a gain improvement of about 5 dB and a NF reduction in excess of 1.5 dB when compared with an optimized conventional EDFA. It is also shown that with further optimization the composite EDFA can be employed in a practical fiber link as a pre-amplifier without the use of an input isolator. Finally, a high-gain composite EDFA has been experimentally demonstrated which exhibits a gain of 51 dB (54 dB) and NF of 3.1 dB for only 435 mW (93 mW) of pump power. >
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
