Efficient design of composite honeycomb sandwich panels under blast loading

Abstract

Hybrid composite honeycomb sandwich structures (HCHSS) were employed due to high specific strength and stiffness and higher impact resistance property required for the aerospace and defence fields. The numerical modelling of the efficient HCHSS was developed for the core, front and back face plate using the C3D8R elements to determine the realistic failure behaviour for the honeycomb sandwich structure. The ConWep blast simulation loading was applied for the HCHSS. Advanced composite materials were used for the blast analysis of the HCHSS (carbon/epoxy, graphite/epoxy, woven basalt fibres/polypropylene and woven Kevlar fibres/polypropylene). The damage initiation and damage propagation based progressive damage modelling was developed and implemented in the VUMAT code for composite materials to determine the actual failure behaviour of the HCHSS. The face sheets used in this model were of a stainless-steel alloy AL-6XN. The sandwich structure was subjected to blast loads of 1, 2 and 3 kg of TNT and their performance was compared w.r.t both front and back-face deflection. The effectiveness of sandwich panels was further examined by altering the thickness of the core. Fibre-metal laminates (FML) were used in place of the steel face sheets in the panel in order to minimise its mass, and a thorough analysis of the panel’s mass in relation to its peak deflection was carried out. Upon analysing the results, it was noted that the panel with the basalt fibre reinforced polymer (BFRP) core gave the best results compared to other composite materials. For a blast load of 3 kg TNT, the peak back face deflection (PBFD) of HCHSS with a BFRP core decreased by 10.64%, 7.61% and 4.75%, respectively, compared to panels with CFRP, GFRP, and KFRP cores. The peak deflection of the panel decreased as the BFRP core thickness increased. The energy absorption capacity of the panel also increased with increasing thickness. Additionally, it was found that panels with BFRP cores and KFRP-steel laminate face sheets provided the optimum balance of strong blast resistant performance and light weight. Compared to the metallic (steel) sandwich panel, the mass of the sandwich panel with KFRP-steel laminate face sheets and BFRP core was reduced by 33%, but at the same time, its PBFD increased by almost 50%.