Abstract

The existence of elevated levels of antibiotics in wastewater has facilitated the emergence and spread of pathogens with antimicrobial resistance (AMR). When combined with the worldwide water scarcity issue, this situation results in detrimental impacts on both the ecosystem and human well-being. Traditional methods employed by wastewater treatment facilities exhibit limited effectiveness in eliminating antibiotics. This paper describes the synthesis and performance of two-dimensional (2D) lamellar free-standing graphene oxide (GO)/Ti3C2Tx membrane for the removal of antibiotics from wastewater. The 50 %GO/Ti3C2Tx composite membrane demonstrated a remarkable increase in water flux, achieving 61.9 L m−2 h−1, surpassing the performance of the pristine GO membrane, which achieved 22.8 L m−2 h−1. Additionally, the GO/Ti3C2Tx composite membranes exhibited outstanding tetracycline rejection, consistently exceeding 99 %, a significant improvement compared to the pristine Ti3C2Tx membrane. The composite membranes of with a ratio of GO to MXene of 50 %, 40 %, 30 % and 20 % had contact angles of 54.5°, 57.4°, 60.6°, and 61.6°, respectively. Combining GO and Ti3C2Tx at specific mass ratios enhanced properties, evidenced by altered interlayer spacing and hydrophilicity. Furthermore, the superior composite membrane demonstrated superior antifouling properties compared to both pristine GO and Ti3C2Tx membranes.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call