Abstract
Iron and aluminum water treatment residuals from a water supply plant were used as adsorbents for Tl(I) to treat thallium-containing Tl(I) wastewater and realize the resource utilization of water treatment residuals. The feasibility study results showed that Fe-WTR and Al-WTR reached adsorption equilibria within 120 min. The Langmuir model showed maximum adsorption capacities of Tl(I) on Fe-WTR and Al-WTR as 3.751 and 0.690 mg g−1 separately at an initial concentration of 5 mg L−1. The adsorption capacities of Fe-WTR and Al-WTR positively correlated with pH. The removal of Tl(I) using Fe-WTR exceeded Al-WTR; the adsorbed Tl(I) in Fe-WTR occurred primarily in the reduced state, while the Tl(I) adsorbed in Al-WTR was mainly in acid-extractable and reduced states. FTIR and XPS data showed that Tl(I) and Fe/Al-OH-functional groups formed stable surface complexes (Fe/Al-O-Tl) during adsorption, and there was no redox reaction. This confirmed that WTR is a highly efficient adsorbent for the stable removal of Tl(I), which provides a practical foundation for industrial application in Tl(I)-containing wastewater treatment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have