Efficient absorption enhancement approaches for AlInAsSb avalanche photodiodes for 2-μm applications.

Abstract

Recently, advances in imaging and LIDAR applications have stimulated the development of high-sensitivity receivers that operate at wavelengths of ≥ 2 µm, which has driven research on avalanche photodiodes (APDs) that operate in that spectral region. High quantum efficiency is a key performance parameter for these photodetectors. Increasing the thickness of the absorption region is a straightforward approach to increase the quantum efficiency. However, the primary source of dark current is the narrow-bandgap material used for 2-µm detection. Increasing its thickness results in higher noise. In this paper, we describe two approaches to enhance the quantum efficiency, both of which are superior to a conventional anti-reflection (AR) coating. For normal incidence at 2 µm, finite-difference time-domain (FDTD) simulations show the absorption can be enhanced by more than 100% with a triangular-lattice photonic crystal, and nearly 400% by applying a metal grating. This is achieved by coupling normal incidence light into the laterally propagating modes in the device. Moreover, the significantly higher absorption of the metal grating compared to the photonic crystal is due to the high coupling efficiency provided by the metal grating. This work provides promising methods and physical understanding for enhancing the quantum efficiency for 2-µm detection without increasing absorber thickness, which also enables low dark current and high bandwidth.