Efficiency of Solar Cells Based on Natural Dyes with Plasmonic Nanoparticle-Based Photo Anode

Abstract

Cheap and efficient dye sensitized solar cells (DSSCs) can be prepared using natural dyes responding in the visible region of solar spectrum. Localized surface plasmon resonance (LSPR) plays a very important role for the improvement in the efficiency of DSSCs by using Plasmonic nanoparticles (PNPs) for exploiting the visible portion of the solar radiation by transferring the energy from dye to PNP. This energy transfers from dye to semiconductor TiO2 through PNP which increases the overall photo catalytic activity. In the present study, Al-doped TiO2 photoanodes were prepared via sol–gel route and used for DSSC application. Various natural and synthetic dyes are prepared and the optical transmittance and absorbance of the dyes are measured in the wavelength range of 250–850[Formula: see text]nm using UV-Vis spectroscopy and they are used in DSSC. Natural dyes extracted from fruits and synthetic dye based on Ruthenium (Ru) metal complex is used as sensitizers. Power conversion efficiency (PCE) of solar cells utilizing different dyes is compared. Out of the various natural dyes, beetroot and strawberry extracts based dyes show good absorbance in the visible range of electromagnetic spectrum. On the other hand, synthetic dyes based on Ru complex show strong absorbance over a wide range of visible spectrum. The absorbance increases with increase in concentration of Ru in ethanol. The extracts of beetroot, strawberry and mixed fruits show a peak in absorbance spectra at 501nm, 416nm and 332nm, respectively, indicating the absorption over a wide range of visible spectrum. Maximum efficiency of DSSCs utilizing PNPs sensitized with beetroot and strawberry dyes are found to be 1.5% and 1.3%, respectively.