Abstract

The sorption efficiency of indigenous rice (Oryza sativa) bran for the removal of organics, that is, benzene, toluene, ethylbenzene, and cumene (BTEC), from aqueous solutions has been studied. The sorption of BTEC by rice bran is observed over a wide pH range of 1-10, indicating its high applicability to remove these organics from various industrial effluents. Rice bran effectively adsorbs BTEC of 10 microg mL(-1) sorbate concentration from water at temperatures of 283-323 +/- 2 K. The effect of pH, agitation time between solid and liquid phases, sorbent dose, its particle size, and temperature on the sorption of BTEC onto rice bran has been studied. The pore area and average pore diameter of rice bran by BET method are found to be 19 +/- 0.7 m(2) g(-1) and 52.8 +/- 1.3 nm. The rice bran exhibits appreciable sorption of the order of 85 +/- 3.5, 91 +/- 1.8, 94 +/- 1.4, and 96 +/- 1.2% for 10 microg mL(-1) concentration of benzene, toluene, ethylbenzene, and cumene, respectively, in 60 min of agitation time using 0.1 g of rice bran at pH 6 and 303 K. The sorption data follow Freundlich, Langmuir, and Dubinin-Radushkevich (D-R) models. Sorption capacities have been computed for BTEC by Freundlich (32 +/- 3, 61 +/- 14, 123 +/- 28, and 142 +/- 37 m mol g(-1)), Langmuir (6.6 +/- 0.1, 7.5 +/- 0.13, 9.5 +/- 0.22, and 9.4 +/- 0.18 m mol g(-1)), and D-R isotherms (11 +/- 0.5, 16 +/- 1.3, 30 +/- 2.2, and 33 +/- 2.5 m mol g(-1)), respectively. The Lagergren equation is employed for the kinetics of the sorption of BTEC onto rice bran and first-order rate constants (0.03 +/- 0.002, 0.04 +/- 0.003, 0.04 +/- 0.003, and 0.05 +/- 0.004 min(-1)) have been computed for BTEC at their concentration of 100 mug mL(-1) at 303 K. Studies on the variation of sorption with temperatures (283-323 K) at 100 mug mL(-1) sorbate concentration gave thermodynamic constants DeltaH (kJ mol(-1)), DeltaG (kJ mol(-1)), and DeltaS (J mol(-1) K(-1)). The results indicate that the sorption of organics onto rice bran is exothermic and spontaneous in nature under the optimized experimental conditions selected. This sorbent has been used successfully to accumulate and then to determine benzene, toluene, and ethylbenzene in wastewater sample.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.