Abstract

Detoxification of aflatoxin M1 from solution and milk using layered double hydroxides was investigated. The Aluminum-Magnesium layered double hydroxide (Al-Mg LDH) and Iron-Magnesium layered double hydroxide (Fe-Mg LDH) were selected in their calcined and non-calcined forms to evaluate the effect of the calcination on detoxification. These materials were produced using the co-precipitation method. Preliminary adsorption tests confirmed use of Al-Mg LDH as the selected adsorbent. Characteristics of the adopted adsorbent were studied and confirmed by XRD, FTIR, SEM, and BET methods. Effects of the initial content of aflatoxin, amount of the adsorbents and detoxification time were investigated. Influence of the adsorbents on the nutritional aspects of milk were also studied. The study showed that while the non-calcined forms of LDH were not able to adsorb aflatoxin M1 more than 23%, the calcined form of Al-Mg LDH exhibited 100% adsorption in the solutions and about 70-100% in the contaminated milk samples. The reason is pointed to the fact that calcination of Al-Mg LDH considerably increased the surface area, the total pore volume, and the pore size of the material. Multivariate regression analysis and calculation of the Pearson correlation factor showed that the remained aflatoxin at each time was more strongly correlated with the initial amount of aflatoxin and the elapsed time and less strongly with the amount of the adsorbent. It was found that the adsorption isotherms fitted to the Freundlich equation with a high adsorption capacity of 555.5 mg g-1. PRACTICAL APPLICATION: This study is focused on examining ability of layered double hydroxides (LDH) for adsorbing AFM1 . LDHs are promising layered materials due to some of their interesting characteristics, such as ease of synthesis and uniqueness of structure. In practice, results of this study can be used for detoxification of aflatoxin, especially in milk, at high efficiency in shorter time durations.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call