Efficiency improvement technology of front and rear wall hedging boilers based on combustion optimization and balancing heating surface wall temperature

Abstract

The ”efficiency improvement technology of front and rear wall hedging boilers based on combustion optimization and balancing heating surface wall temperature” is proposed and applied in a 1000MW unit of a power plant, which effectively reduces the large deviation of the heating surface wall temperature, increases the temperature of the main reheated steam, and improves the economy and safety.This paper introduces the principle of ”efficiency improvement technology of front and rear wall hedging boilers based on combustion optimization and balancing heating surface wall temperature”. It takes 1000MW unit as an example to introduce in detail how to use this technology to adjust combustion. The main steam increased by 6 °C, the reheat steam increased by 1.9 °C, the CO decreased from 2000–3000mg/Nm3 before adjustment to about 200 mg/Nm and the wall temperature deviation of the heating surface was significantly reduced. The technology can be widely used in ultra-supercritical once-through boilers with front and rear wall hedging swirl burners to improve the economy and safety of boilers, and has a broad space for promotion. The mutual restriction relationship between environmental performance and environmental protection, while taking into account the potential safety hazards caused by flue gas temperature deviation, establish a more comprehensive and complete combustion model.