Abstract
When a large fuel cell power plant is connected to a district heating network, the cogeneration efficiency of the power plant is usually insufficient (60–79%). In this study, we focused on the latent heat of water generated from the fuel cell reaction H2 + O2 → H2O, which is an unutilized energy source. This technique is a potential solution for enhancing the total efficiency of the system. A new system linking a large-scale fuel cell power plant to a district heating system was developed. Its primary energy efficiency significantly increased (26.6%) owing to the maximum utilization of the latent heat from the water vapor condensation. This innovative system was installed in a 10.56 MW fuel-cell power plant, and operational data for the temperature and flow rate balance were obtained and analyzed. The results indicate that this system reduces investment costs by approximately 50% using cascade heat utilization technology for district heating systems, and consequently, the estimated payback period is less than 2 y.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
