Abstract

Maize is a staple food in Kenya. However, maize is prone to fungal infestation, which may result in production of harmful aflatoxins and fumonisins. Electron beam (eBeam) food processing is a proven post-harvest technology, but published literature is rare on the ability of eBeam to reduce mycotoxins in naturally contaminated maize samples. This study evaluated the efficacy of eBeam doses in reducing viable fungal populations and the destruction of aflatoxins and fumonisins in naturally highly contaminated maize samples from eastern Kenya. Ninety-seven maize samples were analyzed for total aflatoxins and fumonisins using commercial ELISA kits. Then, 24 samples with >100ng/g of total aflatoxins and >1000ng/g of total fumonisins were chosen for eBeam toxin degradation studies. Prior to eBeam exposure studies, the samples were made into a slurry using sterile de-ionized water. These slurry samples were exposed to target doses of 5kGy, 10kGy, and 20kGy, with 0kGy (untreated) samples as controls. Samples were analyzed for total fungal load using culture methods, the quantity of total aflatoxins and fumonisins using ELISA, and the presence of Aspergillus and Fusarium spp. nucleic acids using qPCR for just control samples. There was a significant positive correlation in the control samples between total Aspergillus and aflatoxin levels (r=0.54; p=0.007) and total Fusarium and fumonisin levels (r=0.68; p<0.001). Exposure to eBeam doses 5kGy and greater reduced fungal loads to below limits of detection by plating (<1.9 log(CFU/g)). There was also a significant (p=0.03) average reduction of 0.3 log (ng/g) in aflatoxin at 20kGy (range from -0.9 to 1.4 log (ng/g)). There was no significant reduction in fumonisin even at 20 kGy. eBeam doses below 20kGy did not reduce mycotoxins. These results confirm the sensitivity of fungi to eBeam doses in a naturally contaminated maize slurry and that 20kGy is effective at degrading some pre-formed aflatoxin in such maize preparations.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call