Abstract

BackgroundThe aim of this study was to evaluate the plaque removal efficacies of electric toothbrushes and electric dental floss compared with conventional manual toothbrushing in cleaning the fitting surface of an All-on-4™ concept (Nobel Biocare, Zürich-Flughafen, Switzerland) implant-supported fixed dental prosthesis (FDP).MethodsNine patients with maxillary edentulous arches participated in the study. We investigated two electric-powered brushes (Sonicare Diamond Clean®, Koninklijke Philips N.V., Amsterdam, the Netherlands [SD group], and the Oral-B Professional Care Smart Series 5000®, Braun GmbH, Kronberg, Germany [OralB group]) and one electric dental floss unit (Air Floss®, Koninklijke Philips N.V. [AF group]). A manual toothbrush (Tuft24® MS, OralCare Inc., Tokyo, Japan) was used by the control group. The fitting surface of the FDP was stained to allow visualization of the entire accumulated plaque area. Both the buccal and palatal portions of the plaque area were assessed before and after brushing to evaluate each instrument’s plaque removal rate using a crossover study design. Two-week washout periods were employed between each evaluation.ResultsThe plaque removal rates were 53.5 ± 8.5%, 70.9 ± 6.5%, 75.4 ± 6.3%, and 74.4 ± 4.2% for the control, AF, OralB, and SD groups, respectively. When participants were divided into two groups based on their plaque removal rates with a manual toothbrush (poor brushing and good brushing), the poor brushing group showed significant improvement in the plaque removal rate when using electric-powered toothbrushes. The plaque removal rates for the buccal area were significantly higher for the OralB and SD groups than for the manual brushing group (control group), with rates of 52.8 ± 7.9%, 70.1 ± 7.3%, 77.7 ± 6.5%, and 79.5 ± 3.7% for the control, AF, OralB, and SD groups, respectively. The plaque removal rates in the palatal area were consistently lower than those in the buccal area for each of the three electric instruments.ConclusionsThe results suggest that patients who are not adept at manual toothbrushing may potentially improve their removal of plaque from the fitting surfaces of FDPs by using electric toothbrushes.

Highlights

  • The aim of this study was to evaluate the plaque removal efficacies of electric toothbrushes and electric dental floss compared with conventional manual toothbrushing in cleaning the fitting surface of an All-on-4TM concept (Nobel Biocare, Zürich-Flughafen, Switzerland) implant-supported fixed dental prosthesis (FDP)

  • Plaque accumulation on the fitting surface of the All-on-4TM concept FDPs does not immediately contribute to inflammation around the implants, and may not be directly associated with peri-implantitis, we believe that effective plaque removal on the fitting surface is indispensable to the maintenance of oral hygiene, which could be associated with the inflammation of peri-implant tissues

  • We investigated two electric-powered brushes (Sonicare Diamond Clean® attached to an HX6074/05 brushing head, Koninklijke Philips N.V., Amsterdam, the Netherlands [SD group], and the Oral-B Professional Care Smart Series 5000® attached to an EB20 brushing head, Braun GmbH, Kronberg, Germany [OralB group]) and one electric dental floss unit (Air Floss® attached to an HX8002/05 nozzle, Koninklijke Philips N.V. [AF group])

Read more

Summary

Introduction

The aim of this study was to evaluate the plaque removal efficacies of electric toothbrushes and electric dental floss compared with conventional manual toothbrushing in cleaning the fitting surface of an All-on-4TM concept (Nobel Biocare, Zürich-Flughafen, Switzerland) implant-supported fixed dental prosthesis (FDP). Implant-supported fixed dental prostheses (FDPs) based on the All-on-4TM treatment concept (Nobel Biocare, Zürich-Flughafen, Switzerland) have been developed [1], and their success and survival rates have been widely reported [2,3,4]. It has been reported that fixed prostheses can contribute to the improvement of oral health-related quality of life in patients wearing complete dentures [5]. It is often difficult for patients who wear fixed prostheses to remove plaque from the fitting surface of the prostheses because they are frequently placed in close contact with the alveolar ridge in the maxilla to reduce speech or esthetic issues. Plaque accumulation on the fitting surface of the All-on-4TM concept FDPs does not immediately contribute to inflammation around the implants, and may not be directly associated with peri-implantitis, we believe that effective plaque removal on the fitting surface is indispensable to the maintenance of oral hygiene, which could be associated with the inflammation of peri-implant tissues

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call