Efficacy of coupling heat recovery ventilation and fan coil systems in improving the indoor air quality and thermal comfort condition

Abstract

Mechanical Ventilation with Heat Recovery (MVHR) systems are gaining increasing interest in buildings with low energy demand, for improvement of the Indoor Air Quality (IAQ) and reduction of the ventilation energy loss. In retrofitted buildings, MVHRs are often integrated with an additional air heater to cover space heating demand. Hence, evaluation of the interactions between MVHR and heat emitter, and their effects on indoor airflow characteristics is of significant importance. The present study aims to investigate effects of a combined MVHR-fan-coil system in heating mode on IAQ and thermal comfort parameters inside a retrofitted room, by means of a computational fluid dynamic (CFD) code. The proposed CFD model is validated by comparing the numerical results with experimental data. The results yielded by numerical simulations allow evaluating the indoor environmental quality characteristics as well as addressing the MVHR and fan coil interactions. The results indicate that the airflow discharged from the fan coil could have a significant impact on the age of the air; while it provides a desirable thermal comfort condition within the room, it may hinder to some extent delivery of the fresh air to the occupied zone due to creation of counterflow fields. Furthermore, it is shown that although increasing the fan speed (ON mode) would slightly enhance the air change efficiency, the OFF mode yields not only a better distribution of the fresh air but also a higher ventilation efficiency than when fan coil operates.