Abstract

In this study, a chlorine dioxide solution (UC-1) composed of chlorine dioxide was produced using an electrolytic method and subsequently purified using a membrane. UC-1 was determined to contain 2000 ppm of gaseous chlorine dioxide in water. The efficacy and safety of UC-1 were evaluated. The antimicrobial activity was more than 98.2% reduction when UC-1 concentrations were 5 and 20 ppm for bacteria and fungi, respectively. The half maximal inhibitory concentrations (IC50) of H1N1, influenza virus B/TW/71718/04, and EV71 were 84.65 ± 0.64, 95.91 ± 11.61, and 46.39 ± 1.97 ppm, respectively. A 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) test revealed that the cell viability of mouse lung fibroblast L929 cells was 93.7% at a 200 ppm UC-1 concentration that is over that anticipated in routine use. Moreover, 50 ppm UC-1 showed no significant symptoms in a rabbit ocular irritation test. In an inhalation toxicity test, treatment with 20 ppm UC-1 for 24 h showed no abnormality and no mortality in clinical symptoms and normal functioning of the lung and other organs. A ClO2 concentration of up to 40 ppm in drinking water did not show any toxicity in a subchronic oral toxicity test. Herein, UC-1 showed favorable disinfection activity and a higher safety profile tendency than in previous reports.

Highlights

  • IntroductionA strong oxidant, can inhibit or destroy microbes [1,2,3,4,5]

  • Chlorine dioxide, a strong oxidant, can inhibit or destroy microbes [1,2,3,4,5]

  • A UC-1 containing 2000 ppm chlorine dioxide in water was produced through the electrolytic method with food-grade salt (99% NaCl) and reverse osmosis (RO) water as the starting reactants

Read more

Summary

Introduction

A strong oxidant, can inhibit or destroy microbes [1,2,3,4,5]. Studies have investigated the application of chlorine dioxide in numerous fields such as water or wastewater treatment, environment and food disinfection, and medicine [6,7,8,9,10,11,12,13]. Chlorine dioxide is produced using either an acid-based or an electrolytic method [7,8,10,12]. In the acid-based method, chlorine dioxide is produced by mixing starting materials, such as sodium chlorite and hydrochloric acid, sodium chlorite. Res. Public Health 2017, 14, 329; doi:10.3390/ijerph14030329 www.mdpi.com/journal/ijerph

Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call