Abstract

In various research projects, oxidative stress in irradiated skin was investigated by measuring the production of free radical using EPR spectroscopy. However, comparison of the obtained measuring results proved to be difficult as different preparation parameters were used for those measurements. In the present study the influence of the preparation parameters on the detected radical production was methodically investigated. For this purpose, porcine skin was exposed in situ to UV and VIS-NIR radiation, respectively, while being measured in an X band EPR spectrometer. Prior to the measurements, the skin had been treated with the spin trap N-tert-Butyl-α-phenylnitrone (PBN) and the spin marker 3-(Carboxyl)-2,2,5,5-tetramethyl-1-pyrrolidinyloxy (PCA). The two methods were investigated for quantitative comparability, for advantages and disadvantages and for errors potentially affecting the evaluation of the results. A significant influence of the preparation parameters (concentration and amount of substance) on the detected radical formations could be found. This influence had a nonlinear effect on the detected radical production. 120μl of incubated amount for 1M PBN and for PCA at a concentration of 0.6 and 1.5mM were determined to be the optimum parameters. The incubated skin samples were 1cm in diameter and 300μm thick. Between 22 and 37°C the incubation temperature showed no significant influence on the detected radical production. For the first time it could be demonstrated for PCA-incubated skin that the radiation-induced radical production depends exclusively on the irradiation dose, provided the preparation parameters and the spectral region are kept constant. In addition, the radical production in the UVB-UVA and VIS-NIR spectral regions was measured in PCA- and PBN-treated excised porcine skin. It was found that PBN and PCA provide comparable results for the relative quantity and kinetics of radical production.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call