Abstract
The post-treatment with Ce-rich sealing of Ni-P coating (Ce-sealed Ni-P coating) was developed on Al surface. Effects of corrosion resistance with different phosphorus contents in the Ni-P coatings were investigated in this paper. The results of the polarization curves show that the Ce-sealed Ni-(10wt.%)P coatings have the higher corrosion potential (Ecorr) and the lower corrosion current (icorr), indicating that this coating iSubscript texts a better corrosion inhibitor than Ni-(3wt.%)P coating. These results demonstrate that the P content plays an obvious role on improving the corrosion resistance of Ni-P coatings. It is results of SEM analysis shows that the Ce-sealed Ni-(3wt.%)P coating has not obvious micro-cracks, the Ce-sealed Ni-(10wt.%)P surface with some micro-cracks are appeared on Ce-rich coating. But this micro-cracks phenomenon of Ce-rich coating can not effect on corrosion resistance. Otherwise, there are no peaks of Ce-riched coatings in both XRD patterns, because too less Ce elements and non-crystal tendency is more serious on these coatings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.