Abstract
The effect of the Zr content range in 0.03–0.63 wt% on the microstructure, mechanical properties and high-temperature oxidation behaviors of 9Cr ferritic/martensitic (FM) steels was investigated. The microstructural evolution of steels was studied using Thermo-Calc software, SEM, EBSD and TEM technologies. A full martensite structure was obtained in steels with various Zr contents. The small-sized M23C6 decrease and the larger-sized Zr(C, N) increase with the increasing Zr content, which leads to the increase of martensitic lath width and martensitic block size. The proper Zr content can enhance the oxidation resistance of steel, but Zr addition will reduce the mechanical properties. The decrease in strength and hardness can be ascribed to the reduction of precipitation strengthening and gain size strengthening. The increase in Zr content promotes the formation of Zr oxides, which reduces the formation of MnCr2O4 oxides and Cr2O3 oxides, and finally improves the oxidation resistance of steels.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
