Abstract
Hydrothermal carbonization (HTC) is a thermochemical process that utilizes biomass as feedstocks to produce hydrochars as solid fuel. Cotton textile wastes (CTW) are abundant; most are landfilled or incinerated, causing environmental pollution. CTW is rich in cellulose, thus suitable as biomass feedstock. HTC at a moderate temperature below 230 °C yields low-value hydrochars with low carbon content; however, an acid catalyst enhances the reaction. In this study, zinc-activated cotton textile waste (Zn-CTW) was synthesized via incipient wetness impregnation and used as a catalyst in hydrothermal carbonization to produce hydrochars. The reactions were conducted in a batch reactor at a temperature of 200 °C for 3 h. The effects of ZnCl2 catalyst loading on CTW were studied. The characteristics of hydrochars in terms of surface morphologies, hydrogen/carbon (H/C) and oxygen/carbon (O/C) ratios and surface functional groups were affected by the ZnCl2 loading on CTW. The results show that the hydrothermal carbonization of Zn-CTW-1.5 obtained hydrochars with the lowest H/C and O/C ratio values of 1.286 and 0.614, respectively. The FTIR analysis indicates stretching vibration of the C-O bond, which are the carboxylic acids and esters formed in the hydrochars. The hydrochars' surface morphologies show irregular and rough surfaces. It is concluded that Zn-CTW has the potential as a heterogeneous catalyst to produce hydrochars via hydrothermal carbonization
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.