Abstract
The effects of catalyst supports on catalyst performance in the hydrotreatment of vegetable oils (to produce fuel-range hydrocarbons such as gasoline, jet fuel, and diesel) were investigated, using three types of zeolites (ZSM-5, HY, and zeolite-beta (BEA)) that differ in their silica/alumina ratios. Structural characterization of the catalysts was performed using ICP, XRD, BET, TEM, and NH₃-TPD. Catalytic tests were carried out in a fixed-bed reaction system at 400 °C and 50 bar. In the hydrotreatment of soybean oil, higher conversions into liquid hydrocarbons and fuel-range hydrocarbons were found when supports with lower Si/Al₂ ratios were used. Specifically, Pt/BEA (Si/Al₂ = 25) produced the highest conversion into liquid products (72%) and the highest selectivity for hydrocarbons in the jet fuel (46%) and diesel (51%) fuels. A Pt loading amount of 3 wt% in this catalyst gave the best catalytic performance because of the optimal balance between acidic and metallic sites. Finally, the kinds of vegetable oils in the hydrotreatment performance over Pt/BEA (Si/Al₂ = 25) affected the order; waste-cooking oil > jatropha oil > soybean oil.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
