Effects of Y-Jet Nozzle Mixing Chamber Length and the GLR on Spatial Asymmetric Spray.

Abstract

The Y-jet nozzle is simpler to design than other twin-fluid nozzles and has various advantages such as having a wide turn-down ratio. For this reason, it is mainly used for industrial boilers and combustion. The Y-jet nozzle comprises liquid and assist gas supply ports, a mixing chamber, where two fluids (liquid and the assist gas) are mixed, and an exit orifice. The time it takes to mix the two fluids in the mixing chamber depends on the length of the chamber, which determines the spray and particulate properties. Therefore, the mixing chamber is one of the most important factors when designing the Y-jet nozzle. The gas to liquid mass flow rate ratio (GLR) is an important variable that affects the spray characteristics of the Y-jet nozzle. In this work, a laboratory-scale Y-jet nozzle spray experimental setup was developed to perform spray experiments. In particular, we observe the spray properties in the front and right directions to observe spatial spray properties. Significant results were obtained depending on the length of the mixing chamber, the spray pattern, and the Sauter mean diameter according to the GLR. We found that a mixing chamber with longer length reduces the effect of asymmetric spray and confirm that the central axis of spray is more stable.