Abstract
AbstractStarch‐based corn grits are extruded and then the extrudates are fried to development for corn snacks with low oil content, improved texture, and preserved color characteristics. Effects of screw speed (100–300 rpm), feed moisture (37–47%), and xanthan gum (XG) level (0–1%) on expansion, oil absorption, hardness, color, and microstructural properties of fried extrudates are examined. Increased screw speed increases expansion index (EI) due to enhanced starch gelatinization. Elevated feed moisture content increases EI as a result of the low solubility index of starch‐based extrudates. The oil absorption of extrudates increases as screw speed and moisture content are elevated as a result of holes in the surface after frying. On the other hand, the incorporation of XG decreases oil absorption due to reduced holes on the surface. Hardness values range from 7.58 ± 0.47 to 42.26 ± 1.44 N. Increasing moisture content decreases the hardness of fried extrudates while increasing screw speed results inan increase in hardness. The incorporation of XG increases the hardness of extrudates. Increased screw speed, feed moisture, and XG ratio increase the lightness value and decrease the redness value. Browning index (BI) is decreased with an increase in feed moisture and XG level.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
