Abstract
ABSTRACT Flexible airport pavements may require polymer-modified asphalt binder for their asphalt concrete (AC) mixes to withstand heavy gear loading and slow traffic moving in taxiways and aprons. Waste plastics could be repurposed as a possible alternative to Styrene–butadiene-styrene (SBS) modifiers. In this study, the feasibility of using granulated recycled high-density polyethylene (HDPE) waste was evaluated as an asphalt binder modifier for airfield pavements. A base asphalt binder was modified with waste HDPE to obtain a Superpave performance grade (PG) of 70-22. Adding waste HDPE would increase binder’s stiffness and bond to aggregate, it slightly improved ductility and elasticity; but less than SBS polymer-modified binders. The AC mixes prepared with waste HDPE-modified binder showed less potential for rutting and cracking compared control AC mixes with PG 64-22. However, the rutting and cracking potential was higher when compared to their SBS-modified PG 70–22 counterparts. On the other hand, AC mixes containing waste HDPE-modified binder were less susceptible to moisture-induced damage. It appears that using waste HDPE-modified binder is feasible where improving adhesion and resistance to moisture-induced damage AC mixes are needed and embrittlement and elastic recovery are not critical, while meeting rutting and cracking potential regional thresholds.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.