Abstract
The objective of this research was to investigate the influence of Warm Mix Asphalt (WMA) additives on asphalt mixture properties through the laboratory testing programs such as air voids, tensile strength ratio (TSR), dynamic stability, and low temperature bending failure strain tests. The experimental design included the use of three WMA additives of Sasobit, Evotherm and Rediset, one base (unmodified) binder source, and one modified binder source. The WMA mixtures were compared to those of controls, i.e., mixtures without the additives. Results from this study showed that: (1) WMA mixtures with Rediset, Evotherm, and Sasobit had slightly higher air voids than Hot Mix Asphalt （HMA）; (2) All WMA mixtures with SBS modified asphalt have lower TSR values than the original ones. The TSR of the WMA mixtures with base (unmodified) asphalt is not significantly different from HMA; (3) The WMA mixtures with SBS modified asphalt have lower values of the dynamic stability and bending failure strain than HMA, while the WMA mixtures with base asphalt are contrary, except with Rediset additives.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
