Effects of various frequencies and powers of ultrasound on cleaning of flat sheet membrane during and after microfiltration

Abstract

Membrane processing has found many applications in various industries as an advanced method of separating materials in liquid or gas. The greatest obstacle in using membrane filtration technology is fouling, particularly in porous membranes. The fouling phenomenon is the result of organic and inorganic materials depositing on the surface and pores of membrane. In this study, the effect of ultrasound frequency (37, 80 kHz, and tandem) and amplitude of sonication (30, 60, and 90%) were evaluated on flux recovery during and after microfiltration. Results showed that the 37 kHz and tandem frequencies significantly improved the permeate flux at earlier minutes, particularly when tandem frequency was applied. In addition, the permeate flux was increased as the sonication power increased. However, the interaction effects between frequency and sonication power showed that the ultrasound frequencies were more effective than sonication power on flux recovery. Furthermore, the calculation of fouling percentage showed that both low frequencies and high amplitude together significantly reduced the fouling agents during the cleaning process. However, there were no remarkable statistical effects among the same levels of sonication power during the cleaning process. The interaction effects of various frequencies and powers of ultrasound on cleaning membranes were evaluated and more cleaning efficiency was observed in comparison to sonication power when low frequency applied.