Abstract
Effects of ultraviolet-assisted photo-electrochemical (PEC) etching current densities (J=20, 40, 80, and 160mA/cm2) towards structural, physical, and optical properties of aluminium indium gallium nitride (AlInGaN) semiconductors as well as corresponding schematized mechanism were studied and discussed. Formation of porous AlInGaN semiconductors at J lower than 80mA/cm2 has led to the acquisition of larger lattice parameters c and a, out-of-plane strain, in-plane strain, and hydrostatic strain as compared to the non-porous semiconductor, owing to the generation of more vacancy-type defects in the porous AlInGaN semiconductors. For the porous semiconductor formed at J greater than 80mA/cm2, the etching was affected by a limited mass transport of electrons and holes for anodic oxidation and cathodic reduction. According to the band gap (Eg) and Urbach energy (UE) determined from photoluminescence (PL) shift and UV–Vis absorption measurement, the vacancy-type defects were revealed as the radiative localized states that led to the enhancement in PL peak intensity. The acquisition of a lower density of dislocation-type defects in the porous semiconductors in contrast to the non-porous one on the other hand indicated that the dislocations were the non-radiative recombination centres, in which much of the density has been eliminated after PEC etching in the 1% potassium hydroxide electrolyte.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have