Abstract
The technology of ultrasonic vibration assisted plastic forming possesses a great many merits, such as reducing the deformation resistance and friction, as well as improving the surface quality of parts. In this study, the ultrasonic vibration assisted compression tests were carried out on pure titanium in order to improve its formability. The results indicating that the ultrasonic vibration had no effort on elastic deformation, and the temperature of material only increased by 6 °C after compression with applying the ultrasonic vibration. Therefore the influence of temperature increase on reduction of flow stress could be ignored. After excluding interface friction and temperature effects, ultrasonic vibration can still decline the flow stress, the mechanism of deformation includes ultrasonic softening, stress superposition and strain hardening. In the intermittent vibration tests, the material shows the residual softening effect after stopping vibration. By observing the microstructure of material with SEM, it shows that the ultrasonic vibration can promote the generation of deformation twins, causing the grain refinement and the reduction of the twins, which is the major factor of affecting the residual softening effect.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
