Abstract
The electrodeposition of the eutectic Sn-Ag-Cu alloy (Ag: 3.5 wt %, Cu: 0.75 wt %) as a Pb-free solder in an plating bath containing thiourea and polyoxyethylene lauryl ether (POELE) as additives was examined. The addition of thiourea was necessary for the stabilization of the plating bath containing all metal cations and Both POELE and thiourea produced alloy films with a smooth surface and a homogeneous distribution. Thiourea adsorbed on Ag, Cu, and Sn and suppressed the subsequent codeposition, while POELE adsorbed only on Sn, leading to the suppression of the subsequent Sn deposition. These effects resulted in the codeposition of the Sn-Ag-Cu alloy with a eutectic composition and smooth surface. The melting point of the electrodeposited Sn-Ag-Cu alloy was 216°C, which is consistent with the phase diagram of Sn-Ag-Cu alloy and satisfies the industrial temperature requirements for Pb-free solders. © 2002 The Electrochemical Society. All rights reserved.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
