Effects of thiol‐ene click reaction on morphology and electro‐optical properties of polyhedral oligomeric silsesquioxane nanostructure‐based polymer dispersed liquid crystal film

Abstract

AbstractPolymer dispersed liquid crystals (PDLCs) have lit a flash of interest due to the distinctive property of electrically controlled switching. However, too high‐driving voltage associated with porous polymer networks always limit their wider range of applications. Herein, we reported a PDLC system containing LCs, 2,2′‐(Ethylenedioxy)diethanethiol (DET) with thiol groups, cage‐like nanostructure acrylic polyhedral oligomeric silsesquioxane (KH570‐POSS) and KH570‐SiO2 nanoparticle modified by acrylic groups. The cage‐like KH570‐POSS microstructure was injected to the polymer matrix when KH570‐POSS reacted with DET via thiol‐ene click reaction. The morphological results demonstrated that the droplet size increased with the higher content of DET due to the decrease of the crosslink between the acrylic groups in KH570‐POSS, which results in a less dense of polymer network and thus make the LC droplets easier to be driven in the electric filed. Then, a silica‐based nanoparticle KH570‐SiO2 modified by acrylic groups was introduced into the system. The results indicated that KH570‐SiO2 could replace partial KH570‐POSS to form the polymer network via thiol‐ene click reaction, which increased the compatible ability of SiO2 nanoparticles in the as‐made film. The contrast ratio was increased to 165 when there was nearly 5 wt% content of KH570‐SiO2. Besides, the driving voltage was reduced by almost 60% and the sample could be fully driven by 30 V which is lower than the safe voltage (36 V). This study opens a route for the preparation of commercial PDLC films by thiol‐ene click reaction, enabling the creation of low‐voltage‐driven smart windows.