Effects of thin-layer boilover on flame geometry and dynamics in large hydrocarbon pool fires

Abstract

This work aims to estimate the effects of thin-layer boilover on flame geometry and dynamics. A series of large scale experiments (in pools ranging from 1.5 to 6 m in diameter) were performed using gasoline and diesel as fuel. As expected, only diesel showed evidence of this phenomenon. This article presents a summary of the results obtained for flame height, tilt and pulsation. Flame height increases during water ebullition, though the increase is no longer detectable when wind speed exceeds certain values. Correlations previously presented in the literature to predict flame length and tilt were modified in order to fit the results obtained during thin-layer boilover. However, the influence on flame tilt is not as great and the equations for the stationary period seem suitable for the entire fire. Results of flame pulsation during the stationary period fill the gap in the literature for fires between 1.5 and 6 m and fit previous correlations. On the other hand, during ebullition, the flame pulsates faster, as air entrainment is greater and, as one would expect, this effect decreases with pool size. A new equation for estimating pulsation frequency during boilover is proposed.