Abstract
The fracture behaviour of a polyetherimide (PEI) thermoplastic polymer was studied using compact tension (CT) specimens with a special emphasis on effects of specimen thickness and testing temperatures on the plane strain fracture toughness. The results show that the valid fracture toughness of the critical stress intensity factor, K IC, and strain energy release rate, G IC, is independent of the specimen thickness when it is larger than 5 mm at ambient temperature. On the other hand, the fracture toughness is relatively sensitive to testing temperatures. The K IC value remains almost constant, 3.5 MPa $$\sqrt {\text{m}} $$ in a temperature range from 25 to 130°C, but the G IC value slightly increases due to the decrease in Young's modulus and yield stress with increasing temperature. The temperature dependence of the fracture toughness, G IC, was explained in terms of a plastic deformation zone around the crack tip and fracture surface morphology. It was identified that the larger plastic zone and extensive plastic deformation in the crack initiation region were associated with the enhanced G IC at elevated temperatures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have