Abstract
Auxiliary forced convection induced by axial flow fans was introduced to improve the ventilation and heat dissipation of a large-scale dry cooling tower under crosswinds. A numerical model coupling aerodynamic characteristics of the fans, thermo-flow characteristics of the tower, and thermodynamic calculations of the condenser was developed. By altering fan layout position, compactness, and inclination, the induced effects on thermal performance of the indirect dry cooling system were studied. Results showed that at wind speeds below 6 m/s, it is best to arrange the fans horizontally on the inlet cross-section of tower body. On this basis, distributing the fans uniformly in three rings could reduce flow turbulence inside the tower and meanwhile increase the tower ventilation. A moderate inclination of the fans could improve the synergy between the ventilation directions of the fans and airflow directions inside the tower. The combination of these steps significantly enhances thermal performance of the indirect dry cooling system, and the caused drop in back pressure of the turbine exceeds 3 kPa. At high wind speeds, the vertical arrangement of the fans outside the radiators becomes the most-effective layout for alleviating the adverse wind effects by remarkably reducing air inflow deviation angles of the radiators.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.