Abstract
In this work, methane adsorption and textural and surface characteristics of selected 46 microporous metal-organic frameworks and 6 other adsorbents were measured experimentally. The objective of this work is to identify either the most relevant characteristics or a combination of multiple properties, which will qualify a given sample to be a good methane uptake material in a moderate pressure range (up to 70 bar) and at 298 K. It is found that there is an overall linear tendency between maximum excess methane adsorption and BET specific surface area. The micropore volume correlates to the maximum excess methane adsorption as well, irrespective of the chemistry and functionalities of materials. In addition, micropore size distribution has an impact on methane uptake. When considering the total methane uptake, special attention should be paid to the effect from packing density. The evaluation also focuses on the discussion of deliverable capacity and concludes that optimal adsorption enthalpy is desired to avoid large amount of methane retained at the minimum desorption pressure in practical vehicular applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.