Abstract
In the present work the effects of temperature and holding time on the sintering of ladle filler sand are studied. Laboratory experiments are carried out using pellets made of chromite based filler sand and two steel grades containing different contents of Mn and Al. It is found that the liquid steel plays a major role in the sintering behavior. The results also show that the amount of liquid phase in the sintered sand pellets increases with the increase of temperature and holding time. The Al2O3 content increases substantially in the chromite phase (spinel), especially in the region close to the liquid phase, when the temperature is high enough or when the holding time is long enough. Higher content of dissolved Al would accelerate the formation of the alumina‐rich chromite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.