Abstract
Effects of the surface-treated A5052 aluminum alloy on the adhesiveness of joining dissimilar materials, such as A5052 aluminum alloy sheet and polyamide resin sheet, was examined to manufacture a multi-material. Various surface treatments for the A5052 sheet were performed. The hot melt adhesive sheet comprising polyamide resin was used as the adhesive. The shear strength of adhered specimens was measured via tensile testing, and the shear strength was made to be the joining strength. Using various surface treatment techniques, oxidation films with different hole sizes and surface roughness were formed on the A5052 aluminum sheets. The joining strength of the surface-treated specimens was the lowest, whereas those joined via anode electrolysis exhibited the highest joining strength. These differences in joining strengths were owing to the anchor effect and chemical interfacial bonding force.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.