Abstract
The surface oxygenic functional groups are significant to the capacity and cycle stability of supercapacitor. Coconut shell-based activated carbon (CS) with high surface oxygen content was used as starting material and reduced by hydrogen. The measurement results of microstructure showed that the specific surface area and total pore volume increased a little. While the surface oxygen content decreased greatly according to the results of X-ray photoelectron spectroscopy (XPS). Electrochemical behaviors of the electrode built with CS and hydrogen reduced CS (HCS) were investigated in two kinds of electrolytes, 6 mol L-1 KOH and 1 mol L-1 Et4NBF4/PC, respectively. The results showed that the surface oxygen groups have little influence to the electrochemical properties of supercapacitor in KOH electrolyte. As for supercapacitor in Et4NBF4/PC, HCS presents higher specific capacitance, higher energy density, better capacity retention and lower leakage current than those of original CS. This indicates that the surface oxygenic functional groups have reaction and impediment to the organic electrolyte. The study not only provides a simple and effective method for large-scale and safe application of supercapacitors using organic electrolyte, but also offers a better understanding of the action of surface functional groups on the electrochemical performances of porous carbon materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.