Abstract
Effects of surface crosslinking of chitosan/poly(acrylonitrile) (PAN) composite nanofiltration membranes at different crosslinker (glutaraldehyde) concentrations and crosslinking times on their surface chemical composition and sieving properties such as pure water permeation, molecular weight cut-off and the rejection of mono/divalent salts and mono/oligosaccharides were investigated. Fourier transform infrared-attenuated total reflectance spectroscopy (FTIR-ATRS) and X-ray photoelectron spectroscopy (XPS) studies revealed the crosslinking of chitosan with glutaraldehyde as well as variations in chemical composition with glutaraldehyde concentration and crosslinking time. Pure water permeation/swelling in water decreased and rejection of salts and sugars increased with increasing glutaraldehyde concentration, indicating pore contraction and increase in hydrophobicity as well as pore tortuosity due to crosslinking. Molecular weight cut-offs of surface crosslinked membranes were in the range of 550–700 Da, a characteristic of nanofiltration membranes, whereas uncrosslinked membrane had cut-off of >1500 Da. The crosslinked membranes were found to be stable over 10-h operation for pure water permeation and the stability increased with increasing glutaraldehyde concentration.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.