Abstract
A steam-based treatment for the dehydrochlorination of poly(vinyl chloride) (PVC) at atmospheric pressure was evaluated. Temperatures ranging from 170 to 250 °C and steam concentrations of up to 75 vol% were applied to PVC resin and flexible PVC. Overall, the addition of steam increased the dehydrochlorination ratios for both sample types, regardless of temperature. PVC resin reached a maximum dehydrochlorination ratio of 76% after 1 h of treating at 250 °C and at a steam concentration of 50 vol%; this compares favorably to the 61% achieved under nitrogen. Higher steam concentrations reduced the maximum dehydrochlorination ratio for PVC resin; this was shown to be the result of a shielding effect due to rapid, superficial dehydrochlorination. This effect was not observed for flexible PVC, which reached a maximum dehydrochlorination ratio of 69% after 1 h of treating at 250 °C and at a steam concentration of 75 vol%; again, this is a significant improvement over the 51% value obtained under nitrogen. Moreover, the loss of plasticizer was shown to account for the majority of the flexible PVC weight loss. The reaction kinetics was also investigated. The proposed treatment is of special interest for the treatment of PVC medical equipment, since it could fulfill the needs for both sterilization and dehydrochlorination which the disposal of this waste requires.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
