Effects of soil cracking on the seismic response of soil–structure systems

Abstract

A numerical study on the influence that cracks and discontinuities (closed cracks) can have on the seismic response of a hypothetical soil–structure system is presented and discussed. A 2-D finite-difference model of the soil was developed, considering a bilinear failure surface using a Mohr–Coulomb model. The cracks are simulated with interface elements. The soil stiffness is used to characterize the contact force that is generated when the crack closes. For the cases studied herein, it was considered that the crack does not propagate during the dynamic event. Both cases, open and closed cracks, are considered. The nonlinear behavior was accounted for approximately using equivalent linear properties calibrated against several 1-D wave propagation analyses of selected soil columns with variable depth to account for changes in depth to bed rock. Free field boundaries were used at the edges of the 2-D finite-difference model to allow for energy dissipation of the reflected waves. The effect of cracking on the seismic response was evaluated by comparing the results of site response analysis with and without crack, for several lengths and orientations. The changes in the response obtained for a single crack and a family of cracks were also evaluated. Finally, the impact that a crack may have on the structural response of nearby structures was investigated by solving the seismic-soil–structure interaction of two structures, one flexible and one rigid to bracket the response. From the results of this investigation, insight was gained regarding the effect that discontinuities may have both on the seismic response of soil deposits and on nearby soil–structure systems.