Effects of Slash, Machine Passes, and Soil Moisture on Penetration Resistance in a Cut-to-length Harvesting

Abstract

Multiple entries into forest stands are often needed for fire hazard reduction and ecosystem restoration treatments in the Inland-Northwest U.S.A. region. However, soil compaction occurring from mechanized harvesting operations often remains for many years and may contribute to a decline in long-term site productivity. A controlled experiment on a silt loam soil was conducted to determine (a) the effectiveness of logging slash to buffer compaction, (b) the influence of the number of machine passes, and (c) the contribution of soil moisture to changes in penetration resistance during a cut-to-length harvest in northern Idaho. Penetration resistance was measured at three soil depths (10, 20, and 30 cm) for three different moisture contents (low, medium, and high) and slash amounts (none, light, and heavy) after each of 12 machine passes (one pass each with a harvester and an empty forwarder, and 10 passes with a fully-loaded forwarder). At all three soil depths the main effect of moisture content and machine passes on penetration resistance was significant, but slash amounts alone did not significantly affect penetration resistance. After 12 passes, we measured the greatest penetration resistance in the medium soil moisture treatment at 5 to15 cm of soil depth. When evaluated at similar moisture contents after harvesting, the soil that was driest during machine traffic (low moisture treatment) had the lowest penetration resistance. Slash was important for protecting the soil against compaction in the medium and high soil moisture treatments. Penetration resistance did not significantly increase after the second pass of a fully-loaded forwarder (31,752 kg) at any moisture content or slash level. Managing felling operations to take advantage of dry soil conditions or using slash when soils are moist may help reduce ruts and avoid long-term compaction impacts on this soil type.