Abstract
The fouling potential of the negatively charged silica sol in electrodialysis (ED) by adsorption on the surface of an anion exchange membrane was investigated. Since the fouling potential is related to the physical and electrochemical properties of the silica sol and anion exchange membranes, it is important to characterize the properties of silica sol and membranes. The surface charge of silica sol was investigated by the electrophoretic mobility and its isoelectric point was determined as pH 3. The commercial anion exchange membranes were characterized in terms of exchange capacity, water content, the zeta potential and the electrochemical properties of the membranes using impedance spectroscopy to predict the effects on the electrodialysis performances. Among the characterized properties, exchange capacity and some electrochemical properties of the anion exchange membranes were rather improved after ED experiments. In the electrodialysis of solution containing silica sol, deposition of the silica sol did not decrease the desalting performance of the anion exchange membranes because of loosely packed cake layer on the membrane surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
