Abstract
To examine the application of physical vapor deposition (PVD) silica coating as an approach to retard low temperature degradation (LTD) for dental applications. Accelerated aging characteristics of heat- and surface-treated zirconia material were also investigated by exposing specimens to hydrothermal treatment. The specimens (90 disc-shaped specimens [15 mm ×1.2 mm]) were divided into 9 groups (n = 10) according to the test protocol: Ctrl, control (no surface treatment); Ag, autoclave aging; GrAg, grinding + aging; SiAg, silica coating + aging; GrSiAg, grinding + silica coating + aging; 3FAg, 3-time firing + aging; Gr3FAg, grinding + 3-time firing + aging; 5FAg, 5-time firing + aging; Gr5FAg, grinding + 5-time firing + aging. Accelerated aging was performed in a steam autoclave (134°C, 2 bars) for 12 hours. Following each treatment protocol, X-ray diffraction (XRD) analysis was used to estimate the relative amount of monoclinic phase and corresponding transformed zone depth (TZD). Additionally, a biaxial flexure test was used to calculate the flexural strength. Statistical analysis was conducted with one-way ANOVA and Fisher's LSD test (p < 0.05). The tetragonal-to-monoclinic transformation was retarded by PVD silica coating only on ground surfaces. Ground and heat-treated specimens exhibited the lowest monoclinic content after aging. The biaxial flexural strength value of the GrAg group was significantly higher than the values in all of the other groups except the SiAg group. The flexural strength value of the GrSiAg group was significantly higher than that of the 3FAg group. There was no statistically significant difference between the other groups (p > 0.05). Grinding decreased the susceptibility of zirconia to LTD and increased the flexural strength. PVD silica coating and repeated firing decreased the monoclinic content only in ground specimens during aging.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
