Abstract
Kesterite Cu2ZnSn(S,Se)4 (CZTSSe) shows great promise in thin film photovoltaic application due to its reasonable band gap, low cost and non-toxic earth-abundant composition. Post-selenization is the generally adopted approach to obtain CZTSSe film with large-grain size. Thoroughly understanding and well controlling the grain growth process during selenization is thus essential for achieving high-performance solar cell devices. Here we demonstrate that the absorber microstructure can be adjusted by altering selenization conditions, especially the heating rate and annealing time. It is found that heating rate determines formation manner of top CZTSSe layer, while annealing time affects both the crystallization degree of bottom CZTSSe layer and the selenization of Mo contact layer. Properly adjusting the annealing time at an optimized heating rate is proven to successfully eliminate the fine-grain layer and obtain high quality CZTSSe thin films with large-size grains. Based on the observations, growth mechanisms for the microstructure development during selenization of solution processed Cu2ZnSnS4 films are suggested. Finally, CZTSSe device efficiency of 9.24% is achieved at an optimal selenization condition.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
