Abstract

The paper theoretically investigates the heat transfer of nanofluids with different nanoparticles inside a parallel-plate channel. Second-order slip condition is adopted due to the microscopic roughness in the microchannels. After proper transformation, nonlinear partial differential systems are converted to ordinary differential equations with unknown constants, and then solved by homotopy analysis method. The residual plot is drawn to verify the convergence of the solution. The semi-analytical expressions between NuB and NBT are acquired. The results show that both first-order slip parameter and second-order slip parameter have positive effects on NuB of the MHD flow. The effect of second-order velocity slip on NuB is obvious, and NuB in the alumina–water nanofluid is higher than that in the titania–water nanofluid. The positive correlation between slip parameters and Ndp is significant for the titania–water nanofluid.

Highlights

  • The positive correlation between slip parameters and Ndp is significant for the titania–water nanofluid

  • The second-order slip condition shows a prominent effect on the velocity profile u/u B in Figures 4 and 7

  • We conduct a theoretical study on the heat transfer of alumina/water and titania/water nanofluids in a parallel-plate channel

Read more

Summary

Introduction

Li et al [1] and Duan et al [2] studied the heat transfer rates of nanofluid in microchannels. Based on the above analysis, he proposed that the homogeneous models are more appropriate for predicting the heat transfer coefficient. By using this model, Yang et al [4] studied the variation of forced convection transport with temperature jump in continuous flow and slip flow regimes. F. Hedayati et al [5] studied the variation of TiO2 − H2 O nanofluid mixing convection within vertical microchannel of nanoparticle migration and asymmetric heating. As a result of the migration of nanoparticles under second-order slip condition and the influence of different nanoparticles, the heat transfer of nanofluids is limited.

Mathematical Analysis
Boundary Conditions
Application of HAM
Convergence of the HAM Solutions
Results and Discussion
Conclusions

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.